Candle Care

Container may become hot when burning. Place on a heat resistant surface. Never leave a burning candle unattended, near pets or children. Keep away from combustibles, drafts, vibrations or anything that may be flammable. Keep wax pool free of debris. Burn for periods of no more then 3-4 hours. Discontinue use of the candle when 10mm of wax remains.

1. Light the wick by tilting the candle on a 45 degree angle. If lighting a Wood Wick, Light the wood wick on one side, allow the flame to flow naturally across the wick.

2. Burn the candle until the top surface of wax has melted evenly to the edge of the jar before extinguishing, this may take between 30 minutes to 4 hours after lighting. A full pool of melted wax will keep the candle from tunneling or leaving wax on the sides of the vessel.

3. Trim your cooled wick to be about 5mm before relighting each time. This can be done by simply pinching off any black, used wick and lighting the fresh wick underneath.

4. Discontinue use of the candle when 5-10mm of wax remains or steel tab is visible.

Container may become hot when burning. Place on a heat resistant surface.  Never leave a burning candle unattended, near pets or children. Keep away from combustibles, drafts, vibrations or anything that may be flammable. Keep wax pool free of debris. You are advised to remove any/all objects from your candle before burning for safety reasons. Burn for periods of no more then 3-4 hours. Discontinue use of the candle when 10mm of wax remains or steel tab is visible.